How to thread a pipe?

Threading a steel pipe is not an easy task, but it can be if you are equipped with the right tools. Whether you are working on a home project or an industrial one, there are several tasks involving the assembly of threaded pipes. If you are browsing for the right tool to help you thread a steel pipe, you've come to the right page. We have compiled all the information that you need to know on how to thread a pipe using Ridgid 300 power drive. 

Threading a pipe, the right way

Step 1: Secure the pipe in place

At first, loosen the jaws of the vise to place the pipe. Once it has been placed, with the end you would like to thread sticking out, then tighten it up. Ensure the pipe is secured and tightened before you get started. The process is similar to how you would tighten a bolt or a nut. 

Step 2: Choose the correct die and place it in stock

The threads on the outside of the pipe are based on the diameter of the dies you choose. The diameter is usually listed n the outside of the die itself and there are a series of them. Put the die over the pipe and push it with pressure to ensure it doesn't cut the pipe but spins. We would advise you to drizzle some cutting oil before you slide the die over to the end of the pipe. Lean in and apply some pressure while pushing the die. Then, pull the ratchet handle until you notice the die bite into the pipe. Now, you can release the pressure. 

Step 3: Threading the pipe

After the previous step, you'll have started cutting the thread. Continue the process by pushing the handle backwards. Ensure both die and pipe are properly lubricated with cutting oil. Flip the ratchet in the backward direction a few times more. This will eventually lead to die coming out of the pipe. You can also reverse the thread off the pipe when the last tooth enters the pipe. 

Lubrication is an important process to ensure the longevity of the die as well as to have a smooth threading process of the pipe. Using the Ridgid power drive kit is pretty simple, once you get a hang of the tool. It has a reinforced plastic body and a quick release mechanism to help you through the threading process of the pipe. This tool is highly recommended for service plumbers and for pipeline contractors too. It is lightweight and portable, which is one of the key reasons why this power drive kit is the most sought-after product. Besides having durable die-cast gear, it also has a screw-in brush cover. Controls of this product include forward and reverse slide switch and easily turn on and off feature too.